This is my current project

A full redesign of my 98 ZJ suspension.

When I bought my ZJ it was stock. I looked at many different lift manufacturers, sizes and quality. I researched it for a while and was told many times that if you should just go to the RE 4.5" kit. This is because so many people had started small and worked up to a bigger an bigger lift. So why not start out with a big lift to begin with. So I did, and it was a great kit. I had the RE8000 kit, I ran 32" MTR's and had plenty of room for flexing with almost no trimming. I should have gone with 33's.

Pictures RE8000 and 32" MTR's

Next -> To Gen1